l have 2 12'' kicker cvrs and they are hooked up to 2 bridged amps. l was messing around with the amp settings and now my left one bumps super hard but my right one barely does at all. what should l do?
its a kole audio amp and theres not a knob to just change the balance.and the other one is a profile amp and not a way to change the balance on that one either

adjust balance more to the other side

It could be the gain, or possibly the frequency is are different on each amplifier. Make sure the settings are as close as possible to each other so you can make each sound the same as the other. Keep messing around or take it to an audio shop and for like maybe $5 in labor fee is they will make everything sound great and equal.

So you have them on different amps? If so, how many RMS watts are each one putting out?

Set the gains on each amp using the same method.

The purpose of the gain is to match the signal volts RMS coming from the source (CD player, etc.) to the input of the amp to prevent clipping (damage by over powering).

Here is a guide that will help u set the gain correctly http://box.net/shared/uchv4dbk88

You will need a multi-meter (AC voltmeter, $15 from Radio$hack), Microsoft Excel & a way to burn an audio CD from an MP3.

If u do not have Excel, use this link http://box.net/shared/nkkw1dhk4g

See my site for more info http://spkrbox1.spaces.live.com